Comtech EF Data CDM-550T - Manual (Page 162)

CDM-550T Satellite Modem Revision 3
KST-2000A FSK Remote Operation MN/CDM550T.IOM
D–10
D.2.2.1.3 (ODU: ) ENABLE
Æ STATUS
STATUS: PS:OK RF:OK UC:OK
LNA:OK AG:OK HP:OK DC:OK
This menu displays summary information. The operator may select one of six detailed
status windows. Use the [
←] [→] keys, then press <ENTER>.
The cursor may be moved over six of the seven status parameters to view more detailed
status information. These screens are continually updated while being viewed.
AG = AGC Status
DC = Down Converter
HP = HPA Status
LNA = Low Noise Amplifier (No further detail)
PS = Power Supplies
RF = Reference
UC = Up Converter
FT = Fault
NA = Not Applicable
OK = OK – No Fault
P/Supplies: 7V:OK 17V:OK
-7V:OK 12V:OK
REF: WARM 72M:OK RANGE:NA
SRC:INT XLK:NA PHASE:NA
UPCONV STATUS: OVRTMP:OK
SSYN:OK KSYN:OK PRG:OK
AGC STATUS: EIP:OK
LOOP:OK IIP:OK
HPA: OVERTEMP:OK 9.75V:OK
-5V:OK BIAS:OK PRG:OK
DNCONV STATUS: OVRTMP:OK
LSYN:OK KSYN:OK PRG:OK