Comtech EF Data CDM-550T - Manual (Page 68)

CDM-550T Satellite Modem Revision 3
Front Panel Operation MN/CDM550T.IOM
If the user selects STORED EVENTS, the following sub-menu is displayed:
6.2.6.3 (MONIT:) STORED EVENTS
Select VIEW or CLEAR ALL, using the LEFT/RIGHT arrow keys, then press
ENTER. If the user selects VIEW, the following screen is displayed:
STORED EVENTS: VIEW
CLEAR ALL (PRESS ENTER)
6.2.6.3.1 (MONIT: EVENTS) VIEW
The user may scroll backwards or forwards through the entries in the event log,
using the [
↑] [↓] arrow keys. Pressing ENTER or CLEAR will take the user back
to the previous menu. The event log can store up to 100 events. When a fault
condition occurs, it is time-stamped and put into the log. Similarly, when the
fault condition clears, this is also recorded, as shown below:
If the user selects CLEAR ALL, the event log is cleared, and the user is taken
directly back to the previous menu. However, if there are faults present on the
unit at this time, they will be re-time-stamped, and new log entries will be
generated.
Note: In accordance with international convention, the date is shown in
DAY-MONTH-YEAR format.
If the user selects STATS, the following sub-menu is displayed:
LOG23: 30/11/97 10:37:32
FT - DEMOD LOCK (UP/DWN)
LOG24: 30/11/97 10:37:35
OK - DEMOD LOCK (UP/DWN)
6–32