Comtech EF Data CDM-550T User Manual
Page 97
Advertising
![background image](/files/778891/content/doc097.png)
CDM-550T Satellite Modem
Revision 3
Clocking Modes
MN/CDM550T.IOM
essential to provide an external loop between the ST and TX clock pins. If this is not done, the
modem will assume an async mode, which is not compatible. The loop should be placed between
pin 15 and pin 24 on the 25 pin ‘D’ type interface.
IMPORTANT
FIGURE 10-1 AND FIGURE 10-2, SHOWN ON THE FOLLOWING TWO PAGES,
ILLUSTRATE IN BLOCK-DIAGRAM FORM THE VARIOUS TRANSMIT AND
RECEIVE CLOCK MODES.
10–3
Advertising