Flowserve 400MD Logix - Manual (Page 5)

Introduction
Copyright, Notices and Trademarks
While this information is presented in good faith and believed to be accurate, Flowserve disclaims the implied warranties of merchantability and
fitness for a particular purpose and makes no express warranties except as may be stated in its written agreement with and for its customer.
In no event is Flowserve liable to anyone for any indirect, special or consequential damages. The information and specifications in this docu-
ment are subject to change without notice.
Logix ™ 3400MD digital positioner and ValveSight ™ is a trademark of Flowserve Corporation.
FOUNDATION ™ Fieldbus is a trademark of the Fieldbus Foundation. Information Mapping is a trademark of Information Mapping Inc. Win-
dows® is a registered trademark of Microsoft Corporation.
Windows NT ™ , Windows XP ™ , Windows VISTA ™ and Windows 7 ™ are trademarks of Microsoft Corporation.
NI-FBUS Configurator ™ is a trademark of National Instruments.
About This Manual
This manual is intended as a ‘how to’ reference for installing, wiring, configuring, starting up, and operating the Valtek Logix 3400MD digital positioner with
FOUNDATION fieldbus (FF).
This manual provides detailed information for installation and operation to assist first-time Logix 3400MD digital positioner users.
This manual is written as the technical guide for the experienced fieldbus user. It does not contain information on fieldbus communications
and usage. It is recommended that a user new to fieldbus attend the training courses that are taught by the Fieldbus Foundation to obtain the
background knowledge that is needed to operate a fieldbus segment.
The sections of information contained in the manual follow this order:
• Background and pre-installation
• Logix 3400MD digital positioner mechanical and electrical installation
• Logix 3400MD digital positioner configuration
• Operation
• Reference information
Symbol Abbreviations
This caution symbol on the equipment refers the user to the installation manual for additional information. This symbol appears
next to required information in the manual.
ATTENTION, Electro-Static Discharge (ESD) hazard. Observe precautions for handling electrostatic sensitive devices.
Earth Ground. Functional earth connection. NOTE: This connection shall be bonded to protective earth at the source of supply in
accordance with national and local electrical code requirements.
Abbreviations
AI Analog Input
AO Analog Output
Logix 3400MD Digital Positioner LGENIM3405-02 11/13
5