Flowserve MX-100 Field Unit User Manual

Page 2

Advertising
background image

MX/DDC-100 Field Unit Installation and Maintenance FCD LMENIM2329-01 – 03/11

2

MX/DDC-100 Field Unit Installation and Operation Manual
©2011 Copyright Limitorque. All rights reserved. Printed in the United States of America.

Disclaimer
This document is meant for use with MX Installation and Operation Manual for MX-05 through MX-40. Information
in this document is also applicable to MX-85 through MX-150. No part of this book shall be reproduced, stored in a
retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise without
the written permission of Limitorque. While every precaution has been taken in the preparation of this book, the
publisher assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting
from the use of the information contained herein.

This document is the proprietary information of Limitorque, furnished for customer use ONLY. No other uses are
authorized without written permission from Limitorque.

Limitorque reserves the right to make changes, without notice, to this document and the product it describes.
Limitorque shall not be liable for technical or editorial errors or omissions made herein; nor for incidental and
consequential damages resulting from the furnishing, performance or use of this document.

The choice of system components is the responsibility of the buyer, and how they are used cannot be the liability of
Limitorque. However, Limitorque’s sales team and application engineers are always available to assist you in making
your decision.

This manual contains information that is correct to the best of Limitorque’s knowledge. It is intended to be a guide
and should not be considered as a sole source of technical instruction, replacing good technical judgment, since all
possible situations cannot be anticipated. If there is any doubt as to exact installation, configuration, and/or use, call
Limitorque at (434) 528-4400. The latest revisions to this document are available at www.flowserve.com.

Advertising
This manual is related to the following products: