10 dialling & memories – GAI-Tronics VoIP Telephone Software Configuration Guide User Manual
Page 29
GAI-TRONICS
VoIP Telephone Configuration Guide
Page 29 of 88
STARTDAY: Sets the day of the month on which DST begins:
• 1 -31 for days of month
• 0 ignore this value and use STARTDOW value
• Default
is
0
STARTDOW: Sets the day of the week on which DST begins (1 - Sunday, 7 - Saturday).
Default value is 1.
STARTMONTH: Sets the Month in which DST will begin (Default value is 3).
STARTWOM: Sets the week of the month in which DST will begin. Valid values are 1 - 6,
where 1 is the first week and each subsequent number is a subsequent week. 8 signifies the
last week of the month regardless of which week the last week is (Default value is 8).
STARTTIME: Sets the hour of the day and the minute of the hour on which the unit will start
to use the DST offset if enabled, in the 24-hour format. Default = 02:00.
ENDDAY: sets the day of the month on which DST ends:
• 1 -31 for days of month
• 0 ignore this value and use ENDDOW value
• Default
is
0
ENDDOW: sets the day of the week on which DST ceases (1 - Sunday, 7 - Saturday).
Default value is 1.
ENDMONTH: sets the Month in which DST will cease to operate (Default value is 10).
ENDWOM: sets the week of the month in which DST will cease. Valid values are 1 - 6, where
1 is the first week and each subsequent number is a subsequent week. 8 signifies the last
week of the month regardless of which week the last week is (Default value is 8).
ENDTIME: sets the hour of the day and the minute of the hour on which the unit will cease to
use the DST offset if enabled, in 24 hour format. Default = 02:00.
5.10 Dialling & Memories
The dialling and memory pages are used to set various "dialling" actions - ie how the
telephone initiates calls.
Depending on the keypad layout (see Key mapping page, section 5.11), the telephone may
have a numeric keypad, memory buttons or both.
3XE
D