GAI-Tronics VoIP Telephone Software Configuration Guide - Manual (Page 47)

GAI-TRONICS
VoIP Telephone Configuration Guide Page 47 of 88
At the bottom of the page is a mode entry box with a MODE button. The box offers 3 choices
from a drop-down menu. These preset the functions of LED1 and LED2 to mimic existing
analogue telephone models:
HELPPOINT: Sets LED1 to RING+HOOK, LED2 to OFF
DDA: Sets LED1 to HOOK+RINGOUT, and LED2 to CONNECT+RING.
OFF: Sets LED1 & LED2 both OFF
Clicking the MODE button has the effect of applying and saving the mode settings.
TIMER and CADENCE settings are not affected by the MODE (ie they must be set
independently).
3XE  D