GAI-Tronics VoIP Telephone Software Configuration Guide - Manual (Page 84)

GAI-TRONICS
VoIP Telephone Configuration Guide Page 84 of 88
9.17 UNIT Module Command Line Syntax
Action Verb Parameters
Comment
1 2 3
SET
NAME XXXXXXXXXX
Sets the unit host name for this unit to
be XXXXXXXXXXXX where X is any
alphanumeric character. Maximum of
15 characters. Default Value is
"UNNAMED"
UPDATE
SERVER
xxx.xxx.xxx.xxx
or
FQDN
Sets the IP address of the host
running the TFTP server to be
xxx.xxx.xxx.xxx or resolves the FQDN
using DNS to access the host
containing the update file(s).
FILE Filename
The name of the file on the update
server.
INTERVAL X
This command forces the unit to
attempt a configuration file download
every X hours.
HELPSERVER
xxx.xxx.xxx.xxx
or
FQDN
This command is used to set the
default address for the Help web page
server.
LAN
SPEED
[AUTO |
10 |
100 ]
This command is used to set the
speed or auto negation status for the
WAN Ethernet port. The default value
is AUTO for auto negotiation. If the
speed is auto negotiated the duplex
setting has no effect.
DUPLEX
[FULL |
HALF]
This command sets the duplex value
for the WAN Ethernet port. The
default value is Full duplex
CONFIGID “IDSTRING”
This is used by the configuration
upgrade script to determine if the local
configuration is the same as the one it
wants to upgrade to.
ANI “Identity”
Used as an identifying token to GAI-
Tronics CMA Call Management
Application.
DEFAULT_ANS_MODE: [RING | PICK-UP | PAGE | STEALTH]
Default behaviour determining how an
incoming call is answered. See
section 5.5. Default value RING.
ANSMODE1 “password” Set “passwords” that can be used to
activate 3 special auto-answer modes,
usually for hands-free telephone
types. See web page section for
details.
ANSMODE2 “password”
PAGEMODE “password”
APTENABLE [ON | OFF] APT parameters. See section 5.5.1
APTTIME Xx:xx,xx
APTCOUNT 1-10
APTOKCOUNT 1-10
APTREPORT [ON | OFF]
REBOOT NOW Resets the telephone.
UPDATE NOW Fetches updates immediately.
SHOW ALL
Lists all the current settings and
information for the Unit module. (This
includes unit name, Mac Address and
Firmware version.
3XE  D