GAI-Tronics VoIP Telephone Software Configuration Guide - Manual (Page 34)

GAI-TRONICS
VoIP Telephone Configuration Guide Page 34 of 88
The table below lists all the possible key functions:
Key Function
0 Dials a ‘0’.
1 Dials a ‘1’.
2 Dials a ‘2’.
3 Dials a ‘3’.
4 Dials a ‘4’.
5 Dials a ‘5’.
6 Dials a ‘6’.
7 Dials a ‘7’.
8 Dials an ‘8’.
9 Dials a ‘9’.
* Dials a ‘*’.
# Dials a ‘#’.
A Dials an ‘A’.
B Dials a ‘B’.
C Dials a ‘C’.
D Dials a ‘D’.
MUTE Toggle action key to silence/enable the transmission of audio from the
unit. Usually assigned to a key marked "S" (for Secrecy)
RECALL Defined below.
LNR Last Number Redial
ONHOOK Clears a call and puts the phone into the on hook state. Usually assigned
to a key marked "OFF"
OFFHOOK Answers a call or puts the phone into the off hook state ready to dial.
Usually assigned to a key marked "ON"
TOGGLEHOOK Toggle action key to take the phone on and off hook.
MEM 1, MEM 2
etc., to MEM 10
Attempts to initiate a call using Memory List 1, Memory List 2, etc., to
Memory List 10.
3XE  D