GAI-Tronics ADVANCE System SmartView User Manual Ver 1.3 User Manual
Page 17
Pub. 42004-444B
ADVANCE System SmartView Software User Manual Version 1.3
Page: 15 of 41
f:\standard ioms - current release\42004 instr. manuals\42004-444b.doc
02/11
SmartView Portal List
Displays the current SmartView portal users connected to the server.
Figure 20. Portal List
Client is a list of each portal client’s unique assigned number.
IP Address is the IP address of the portal computer connected to the server.
TX is the last command that was sent to the server.
TX ACK is the acknowledgement received from server.
RX is the last command that was received from the server.
Heartbeat is the last “heartbeat” command sent to the server. The connection between portal and server
is monitored by a periodic data exchange referred to as a “heartbeat.”
User Name is the user name that logged into the Portal. Valid user names are defined in the .hot file
created using the ADVANCE Console programming software.
TX Buffer Count is the number of messages waiting to be sent from the server to the Portal.