Ppi group view – GAI-Tronics ADVANCE System SmartView User Manual Ver 1.3 User Manual
Page 35
Pub. 42004-444B
ADVANCE System SmartView Software User Manual Version 1.3
Page: 33 of 41
f:\standard ioms - current release\42004 instr. manuals\42004-444b.doc
02/11
PPI Group View
A PPI Group is a group of no more than 25 SmartSeries stations. There can be a maximum of ten group
folders, each with a maximum of 25 stations.
Status indicators for stations appear on the appropriate Group folder. Follow the status indicator to the
PPI Group screen, and ultimately to the Station screen for the most detailed information available.
The PPI Group View screen is shown below:
Figure 36. PPI Group View Screen
Notation Name
Description
PPI Station(s)
A maximum of 25 stations can be in a PPI Group.
Note the similarity of status indicators for the PPI Group. They match the zone status because a PPI
Group is only a logical group of stations, and group status is inherited from the zone status.