MultiDyne ACI-2058 - Manual (Page 17)

I NTELLA P ATCH Switches: ACI-2058 User Manual
A54-2058-000 13 A PCON , Inc.
3.5. Set the IP Address
For details, see Setting the IP Address on page 14.
3.6. Access the Switch
3.6.1. Use Embedded Software
The following software is embedded in your ACI-2058 switch. These applications are
immediately available for use without reconfiguration or installation:
• W EB X, an embedded web interface.
• A PCON C MD X, a command line interface.
• Firmware Direct Commands, ASCII programmatic access.
For usage details, see the appropriate software User Manual.
3.6.2. Install Optional Software
To communicate with the switch from a host computer, you can use C ONTROL X, included on
the CD-ROM that comes with the ACI-2058. To use C ONTROL X, install it on the host computer
you plan to use to control the ACI-2058:
1. Insert the CD into the host computer, or download the latest version from the A PCON
website:
http://www.apcon.com
2. Follow the onscreen prompts.
You are now ready to connect the ACI-2058 to a host. For details, see Chapter 4, Connect to a
Host .
Figure 3. ACI-2058 Rear Panel