Unspecified authorization, Figure 63. setting up the shared secret – MultiDyne ACI-2058 User Manual
Page 193
Appendix C: Configuring the TACACS+ Server
A54-3000-100 A
154
A
PCON
, Inc.
11.2.0.4.
Unspecified Authorization
If a user is in the TACACS+ database but doesn’t have an assigned A
PCON
authorization
level, that user receives the switch default. The default can deny access or assign the user a
level, from guest to demonstrators.
You can set default action set to deny access using either of these:
•
W
EB
X
•
Command line interface
Six Corners>> configure userauthentication
Authentication Method? [N]one, [I]nternal, [R]ADIUS, [T]ACACS+ [n/I/r/t/?]: T
TACACS+ servers:
Server 1
IP Address? [10.1.108.0]:
Shared Secret? [Secret #1]:
Enable a second server? [Y/n] N
If server responds with no level? [D]eny access, [G]uest,
[O]perator,ad[V]anced, [A]dministrator [D/g/o/v/a]: D
Figure 62. Setting up the shared secret