Teac DR-07MKII - Manual (Page 118)

118
TASCAM DR-07MKII
Is the OUTPUT LEVEL setting of the unit •
minimized?
Recording does not work. ª
If you are using an external device, check the •
connection again.
Check the input settings again.
•
Confirm that the recording level is not too •
low.
Confirm that the microSD card is not full.
•
Confirm that the number of files has not •
reached the maximum that the unit can handle.
The recording level is low. ª
Confirm that the input level setting is not too •
low.
Confirm that the output level of a connected
•
external device is not too low.
The sound I am trying to record sounds ª
distorted.
Confirm that the input level setting for •
recording (REC LEVEL) is not too high.
Do the built-in effects work? •
The playback sounds unnatural. ª
Confirm that the playback speed is not being •
adjusted.
Confirm that the playback equalizer is not
•
enabled.
Confirm that the level alignment function is
•
not enabled.
Do the built-in effects work?
•
I cannot erase a file. ª
Confirm that you are not trying to erase a file •
that has been copied from a computer after
being write-protected.
This unit’s files do not appear on the ª
computer.
Confirm that the unit is connected to the •
computer using its USB port.
Confirm that USB hubs are not used.
•
Confirm that the unit is not recording or in •
recording standby mode.
13–Troubleshooting