Teac DR-07MKII - Manual (Page 59)

TASCAM DR-07MKII
59
Recording
Before starting the following operation
procedures, level adjustment should be
completed, and the Home Screen should be
open.
1 Press RECORD [º] button to begin
recording standby.
The screen shows the recording file name, the
input source, the recording audio file type
and sampling frequency. Please confirm that
these are as desired before starting recording.
NOTE
If you have set the MONITOR Screen’s INPUT item to ON so
that you can always monitor the input, a pop-up appears
that allows you to turn overdubbing ON or OFF.
For ordinary recording, select OFF and continue to step 2.
2 To start recording, press the RECORD [º]
button again.
When recording starts, the REC indicator
lights continuously, and the display shows the
elapsed recording time and the remaining
recording time.
3 Press the (HOME) [ª] button to end
recording and create the audio file.
To pause recording, press the RECORD
[º] button. Press the RECORD [º] button
again to restart recording in the same
track. If you press the (HOME) [ª]
button after pausing a recorded audio
file up to the moment that you paused
recording is created.
4–Recording