Teac DR-07MKII - Manual (Page 12)

12
TASCAM DR-07MKII
3 Press the RECORD [º] button to switch to
recording standby. The REC indicator will flash.
NOTE
If the or icon appears in the upper right of the Home
Screen, the adjustment for the angle and the left-right channels of
the microphone do not suit the recording setting. Change the
settings. (See “Using the built-in microphone” on page 46.)
4 Use the  or ¯ button to adjust the
recording level. See “Adjusting the input
level” on page 55 for details.
5 Press the RECORD [º] button to start
recording. The REC indicator will light
during recording.
6 Press the (HOME) [ª] button to finish
recording.
REC indicator
NOTE
To pause recording, press the RECORD [ º ] button. Press the
RECORD [ º ] button again to restart recording in the same
track.
7 Press the Á button for playback. If you use
a headphone or amplifier/speaker set,
connect it to the /LINE OUT socket on the
left side panel.
For playback over the built-in speaker set,
enable it on the speaker settings screen
(See “Using the built-in speaker” on page 45.)
Headphones Powered monitor speakers
or amplifier and speakers
Quick Start Guide