Teac DR-07MKII - Manual (Page 47)

TASCAM DR-07MKII
47
If you open or close the microphone pair while
using the built-in stereo microphone and the
left-right channels does not suit the angle of
the microphone, a pop-up message appears
to ask whether you want to swap the left-right
channels of the microphone. (See “Microphone
position detection” on page 49.)
CAUTION
Set the left-right channels of the built-in microphone to •
L-R. When you are using the built-in microphone and the
setting is not L-R,
appears on the Home Screen. (See
“Swapping the left-right channels of the built-in
microphone pair” on page 48.)
Setting the mics to record a clear
stereo sound (X-Y position)
Close the stereo microphone. (X-Y position)
Set this way, the microphone pair is close, and
recording is possible with a clear stereo field
with less phase difference.
If you open or close the microphone pair while
using the built-in stereo microphone and the
left-right channels does not suit the angle of
the microphone, a pop-up message appears
to ask whether you want to swap the left-right
channels of the microphone. (See “Microphone
position detection” on page 49.)
3–Preparation