Teac DR-07MKII - Manual (Page 44)

44
TASCAM DR-07MKII
CAUTION
Do not remove the microSD card from the unit when it is •
connected to a computer by USB.
microSD cards that meet microSD or microSDHC
•
standards can be used with this unit.
A list of microSD cards that have been confirmed to work with
•
this unit can be found on our website (http://tascam.com).
Preparing a microSD card for use
In order to use a microSD card in this unit, you
must format it first.
1 Confirm that a microSD card is installed
and turn the power ON.
2 The following message appears when a
new card or a card formatted for use with
another device is installed in the unit.
3 Press the Á button to start formatting.
4 When formatting ends, the Home Screen
opens.
You can also reformat the card in this unit
at any time. (See “System Settings and
Formatting” on page 109.)
CAUTION
When formatting a card, the unit should be operating on •
AC power supplied through the PS-P515U adapter (sold
separately), USB bus power supplied from a computer, or
batteries with sufficient remaining power.
Formatting a card erases all the data on it.
•
3–Preparation