Teac DR-07MKII - Manual (Page 64)

64
TASCAM DR-07MKII
2 While listening to the input sound, use the
 or ¯ button to adjust the input
level. When the  or ¯ button is
pressed, a pull-up window showing input
level settings appears in the display.
CAUTION
If the Monitor Mix function is disabled, the pull-up •
window will not appear when pressing the  or
¯ button.
When distortion of sound is about to occur as the input •
sound level is increased, the PEAK indicator on the upper
left above the display will be turned on. Adjust the input
level for recording so as not to allow the PEAK indicator to
be turned on.
NOTE
When input monitoring is ON and during overdub recording,
the PEAK indicator lights when the combined input and
playback signals become higher than the set level.
4–Recording