Teac DR-07MKII - Manual (Page 56)

56
TASCAM DR-07MKII
the input level. Press the  or ¯
button to show a pull-up menu screen for
input level setting.
If the input is too high, the PEAK indicator on
the upper left above the display lights.
A ¶ mark is provided at -12dB on the
level meters. Set the input level so that the
indicator bars move to and fro with this mark
at about the center without causing the
PEAK indicator to light red when the loudest
sounds occur.
NOTE
Press the • (HOME) [ª] button to exit recording
standby.
When in recording standby or during recording, the
•
speaker does not output sound even if the SPEAKER
setting is enabled. Connect headphones to the /LINE
OUT jack if you want to adjust the level or record while
monitoring the input. Use the + or − button in the Home
Screen to adjust the monitoring volume. This does not
affect the sound to be recorded.
4–Recording