Teac DR-07MKII - Manual (Page 28)

28
TASCAM DR-07MKII
2–Names and Functions of Parts
Bottom Panel
s Mono speaker
Use this built-in speaker to listen to
recordings.
Sound is not output during recording,
when the unit is in recording standby, when
headphones are connected, when the speaker
is disabled, or when Monitor Mix is enabled.
d
Tripod attachment screw-hole (1/4-inch)
Use this to attach the unit to a tripod or mic
stand.
CAUTION
Tighten the unit securely to the tripod or microphone •
stand to prevent it from falling off.
Place the tripod or microphone stand on a level surface
•
when using it with this unit.
f
Battery compartment cover
g Battery compartment
Install batteries (2 AA) in this compartment
to power the unit. (See “Using AA batteries”
on page 38.)