Teac DR-07MKII - Manual (Page 41)

TASCAM DR-07MKII
41
Press the Á button to fix the settings.
The start-up screen is displayed, and then the Home Screen
appears after the unit has started up.
Date/time adjustment may be skipped by pressing the Á
button, and made later. (See “Setting the date and time” on
page 42)
Shutting down
Press and hold the (HOME) [ª] button until
LINEAR PCM RECORDER
appears on the display.
The power turns off after the unit completes its
shutdown process.
CAUTION
Always use the (HOME) [ª] button to shutdown the
unit.
Do not remove the batteries or disconnect the power cable
(AC adapter TASCAM PS-P515U or USB cable) accidently
while the unit is operating. If you do so, the unit cannot shut
down properly and all recordings, settings and other data will
be lost. Lost data cannot be restored.
Resume function
The unit has resume function. When started up,
the unit is located to the position (time) where it
left off when shut down previously.
If the Playback button is pressed after start-up,
the track the unit was playing when shut down
previously starts to be played from the position
(time) where the unit left off when shut down.
NOTE
The required data are stored in the microSD card. The resume
function does not work if the card is exchanged or formatted.
3–Preparation