Teac DR-07MKII - Manual (Page 90)

90
TASCAM DR-07MKII
Repeated Playback of Selection
(Loop Playback)
With this function, you can continuously repeat
(loop) the playback of a selection that you make.
1 While the Home Screen is open when
stopped or playing back, press the PB
CONT button to open the Playback Control
screen.
2 Press the Á button to start playback,
and press the MARK button at the start
point of the section that you want to
play repeatedly. This position is set as
IN (start) point. Then, appears at the
corresponding point under the playback
indicator bar.
3 Press the MARK button at the end point
of the section that you want to play
repeatedly. This position is set as OUT
(end) point, and loop playback of the
section between the IN and OUT points
starts.
Then, appears at the corresponding
point under the playback indicator bar.
During loop playback the indicator also
appears.
Press the PB CONT button to return to the
Home Screen while maintaining the I/O and
loop settings effective. Even after returning to
the Home Screen, the icon continue to be
shown, along with the and marks shown
at the points corresponding to the IN and OUT
points under the playback indicator bar.
6–Playback