Teac DR-07MKII - Manual (Page 65)

TASCAM DR-07MKII
65
Start the overdubbing
1 Press the RECORD [º] button to set the
unit to record standby.
The overdubbing ON/OFF pop-up appears.
The recording file name, input source,
recording audio file type and sampling
frequency also appear so that you can
confirm them before you start recording.
2 Use the + or - button to select ON from the
overdubbing ON/OFF pop-up.
3 Press the RECORD [º] button to start
overdubbing.
When recording starts, the REC indicator
lights and the display shows the elapsed and
remaining recording times.
The following error message appears if the
selected file cannot be played back.
4 To stop recording, press the (HOME)
[ª] button.
4–Recording