Teac DP-008EX - Manual (Page 50)

50
TASCAM DP-008EX
6 – Basic Recording
CAUTION
•
When undo has been used and there are one
or more undone operations, the UN/REDO
[HISTORY] indicator lights.
The UN/REDO [HISTORY] indicator does not light
if there are no undone operations (the current
state is that of the last operation).
When the UN/REDO [HISTORY] indicator is lit
(because there are undone operations), if you
make a new recording or edit, the last operation
conducted becomes the most recent event, and
you will no longer be able to redo previously
undone operations.
•
When saving a song, a maximum of 500 items can
be saved in the operation history as song files. If
the operation history exceeds 500 items, the oldest
events in the history are erased when the song is
saved. Erased events cannot be restored.
•
When the power is turned OFF (in standby) the
operation history is completely erased. The
operation history is not restored when the power
is turned ON again.
Erasing the operation history
When the power is turned OFF(in standby), the
operation history of the currently loaded song is
erased (cleared). The operation history is not restored,
so past operations cannot be undone or redone when
the power is turned ON again.
You can also erase the operation history of the
currently loaded song without turning the power OFF
by using the following procedures.
NOTE
Turning the power OFF (putting it in standby) does
not erase the operation history of songs that are
not loaded.
1. While pressing and holding the Stop (8) button,
press the UN/REDO [HISTORY] button to open
the
HISTORY
screen.
2. Press the F4 [CLEAR] button.
A confirmation pop-up message appears.
3. Press the F3 [YES] button.
Another confirmation pop-up message appears.
4. Press the F3 [YES] button to erase the operation
history and delete unused data.
The Home Screen reopens when this operation
completes.
NOTE
To cancel erasing the operation history, press the
F4 [NO] button.
TIP
•
If you open the
HISTORY
screen immediately
after erasing the operation history, the event
(operation) that appears is
0
(
-START UP-
),
showing that the operation history has been
cleared.
•
If you want to keep the operation history even
when you power OFF(in standby), turn song
protect ON before turning the power OFF(in
standby). (See “Protecting songs” on page 41.)
CAUTION
You cannot undo erasing the operation history!
Only do it if you are certain about it.