Teac DP-008EX - Manual (Page 85)

TASCAM DP-008EX
85
15 – Message Lists
Messages Meaning and remedy
It’s too Large
The song file is too large.
You are trying to backup a song file that is larger than the open space available on the
FAT partition. (See “Song backup and restoration” on page 77.)
Format the FAT partition (see “Reformatting FAT partitions” on page 74) or connect the
unit to a computer and make more space on the partition by deleting unneeded files, for
example.
Master Track Not
Found
The stereo master track cannot be found.
This appears if you try to export a stereo master track from a song that does not have one
recorded. (See “Exporting stereo master tracks” on page 81.)
Create a stereo master track and then export it.
Master Track Too
Large
The stereo master track is too large.
You tried to export a stereo master track that is larger than the open space available on
the FAT partition. (See “Exporting stereo master tracks” on page 81.)
Reformat the FAT partition (See “Reformatting FAT partitions” on page 74.) or connect
the unit to a computer and delete unneeded files, for example, to make more space
available.
No Armed Track
There is no track in recording standby (armed).
You tried to switch to auto punch in/out mode without putting one or more tracks into
recording standby. (See “Using automatic punching in/out” on page 55.)
Switch to auto punch in/out mode after putting one or more tracks into recording
standby.
No Disk Space
There is not enough space.
This appears if you try to create or copy a song when the MTR partition does not have
enough space.
Delete songs (See “Erasing songs” on page 40.) or format the SD card (See “Formatting
SD cards” on page 72.), for example, to make more space available.
No Master Trk
There is no master track.
This appears if you try to select a stereo master track that does not exist as the source
track when cloning tracks. (See “CLONE TRACK (track duplication)” on page 60.)
Create a stereo master track or select a different source track.
No Song
There is no song.
You are trying to load a song from a partition that has no songs on it. (See “Loading a
saved song” on page 38.)
Change partitions. (See “Selecting the active partition” on page 37.)
No Undo Histry
There is no undo operation history.
There are no actions to be undone. (See “Erasing the operation history” on page 50.)
No SD Card
No SD card has been loaded.
Turn OFF the unit (put it in standby) and then insert an SD card.
Not Stopped
The recorder is not stopped.
This appears when the recorder is not stopped and you push the UN/REDO [HISTORY]
button or any other button that only functions when the recorder is stopped.
Now Recording
The unit is currently recording.
This appears when you try to perform a menu action while recording. There are also other
operations that cannot be done while recording.
Protected Card
The SD card installed in the unit is write-protected.
To record or edit, turn off (in standby) the unit and un-protect the SD card.
Same Track
You have set the same track.
In the clone track settings you have set the same track for both
SOURCE TRK
and
DESTINATION TRK
.
SD Size Error
The capacity of the SD card installed in the unit is too small for this unit to use.
Use an SD card larger than 512 MB.