Teac DP-008EX - Manual (Page 87)

TASCAM DP-008EX
87
16 – Specifications
Media and file systems
Recording media
SD card (512 MB–2 GB)
SDHC card (4 GB–32 GB)
File system
MTR partition: TASCAM original
FAT partition: FAT32
Inputs and outputs
Analog audio input and output
INPUT A connectors
• XLR [BALANCED]
Connector: XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Input impedance: 2.4 kΩ
Standard input level: −8 dBu
Maximum input level: +8 dBu
• Standard jack [UNBALANCED]
Connector: 6.3mm (1/4”) TS standard jack
Input impedance:
10 kΩ or more
(when INPUT A switch set to MIC/LINE)
1 MΩ
(when INPUT A switch set to GUITAR)
Standard input level: −10 dBV
Maximum input level: +6 dBV
Headroom: 16 dB
INPUT B connectors
• XLR [BALANCED]
Connector: XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Input impedance: 2.4 kΩ
Standard input level: −8 dBu
Maximum input level: +8 dBu
• Standard jack [UNBALANCED]
Connector: 6.3mm (1/4”) TS standard jack
Input impedance: 10 kΩ or more
Standard Input level: −10 dBV
Maximum Input level: +6 dBV
Headroom: 16dB
Built-in microphones
Omnidirectional x2
LINE OUT jacks
Connector: RCA pin jacks
Standard output level: −10 dBV
Maximum output level: +6 dBV
PHONES jack
Connector: 3.5 mm (1/8”) stereo mini jack
Maximum output level: 20mW+20mW (THD+N
0.1%, 32Ω)
Data input and output
USB jack
Connector: USB Mini-B 4-pin
Format: USB 2.0 HIGH SPEED mass storage class
Audio performance
Frequency response
INPUT(MIC/LINE) w LINE OUT: 20Hz–20kHz,
+1dB/−3dB
Distortion
INPUT(LINE) w LINE OUT: Less than 0.05%
S/N ratio
INPUT(MIC/LINE) w LINE OUT: More than 81dB
Operating requirements
For the latest information on compatible operating
systems, check the TEAC Global Site (http://teac-
global.com/).
Supported operating systems
Windows XP, Windows Vista and Windows 7
Mac OS X 10.2 and later
General
Power
Four AA batteries (alkaline or nickel-metal
hydride) or
TASCAM PS-P520 AC adaptor (sold separately)
Power consumption
2.4W (maximum)