Vir2 Instruments Acoustic Legends HD - Manual (Page 49)

4 9 . . . . . . . . . . . . . . . . . . . A c o u s t i c L e g e n d s H D
There are two types of faders: “Blue” faders that relate to channel
outputs (the number of faders depends on the number of available
outputs), and four “orange” faders that control return from the four
send effects, as used in Multi setups. Each fader, output or aux
return, has four effect insert points.
Let’s cover output channel features, going from top to bottom.
Add Channel: Adds another output channel to the Outputs section.
Delete Channel: To delete a channel, click on any section of the
channel that doesn’t contain an editable parameter; the channel
becomes outlined in yellow. Click on Delete Channel to delete. Note:
You cannot delete the Aux return channels.
Hide Inserts: Hides all inserts to conserve space.
Edit Effect: To edit an insert effect, click on it. Then click on this
button to open and close the edit section for that effect. To delete an
effect, click on the effect strip that includes the parameters (not the
module in the slot); the effect strip becomes outlined in orange.
Then, press the computer keyboard’s Delete key.
Reset Out Map: This button can be used to restore the output
mapping to the default settings.
Make Default: Clicking on this button saves the current output
mappings as your permanent defaults. (These output mappings are
saved to the Kontakt Player 2 application directory inside the
Defaults folder.)
Name Fields: Each channel has a name field at the top. Double-
click in the field, and type in the desired name.
Insert Effect Slots: To insert an effect, click on the downward
arrow toward the right of the slot, and select the desired effect from
the drop-down list.