Vir2 Instruments Acoustic Legends HD - Manual (Page 67)

6 7 . . . . . . . . . . . . . . . . . . . A c o u s t i c L e g e n d s H D
keyboard. Example: You could set a B3-type organ Instrument to
respond to velocities 1-127, while a pipe organ Instrument responds
to velocities 111-127. Velocities of 111 or above will layer the two
organ sounds for a more powerful effect.
DFD & Load Tab
DFD Preload Buffer Size: Sets the amount of RAM dedicated to
each preload buffer when using DFD. This is an expert setting and
should not be adjusted unless you are instructed to do so from tech
support. You have been warned!
Controller Tab
MIDI Controller #64: This drop-down menu determines how
Kontakt Player 2 responds to MIDI Controller #64, which defaults to
controlling the sustain pedal. Here are your options.
Sustain Pedal and Controller: Kontakt Player 2 will respond to a
switched (on-off) or continuous controller (values above 64 = sustain
on, values 64 or under = sustain off).
Sustain Pedal without Controller: Kontakt Player 2 will recognize
only a switched controller.
Controller Only: Kontakt Player 2 will recognize only a continuous
controller.
Accept All Notes Off/All Sounds Off: This option will filter All
Notes Off and All Sounds Off messages, which some older
controllers send by default.
Accept Standard Controllers for Volume and Pan: This option
will automatically cause each instrument to automatically respond to
CC#7 for volume and CC#10 for pan.