Eneo GXC-1720M - Manual (Page 11)

11
1 2 3 4 5 6 7
8
9
10
1 2 3 4 5 6 7
8
9
10
2.2 The Fixed IP Indoor/ Outdoor Mini-Dome (PoE)
1. Power Input: DC 12V input connects to an external power supply.
2. Power Input: AC 24V input connects to an external power supply.
3. ETHERNET 10/100 Connector:
This is a standard RJ-45 connector for 10/100 Mbps
Ethernet networks. PoE (Power over Ethernet) function: Provides power to the device via the
same cable as used for the network connection.
4. AUDIO IN: Connector is used to connect the audio output from other devices to the IP
camera.
5. VIDEO OUT Connector: Connector provides Composite video output.
6. AUDIO OUT: Provides IP camera audio signal to an external device.
7. GPIO:
6-PIN connector for digital I/O, DC output and GROUND for connecting with external
devices.
8. USB port:
Connects IP camera to USB port on a PC.
9. SD/ SDHC CARD slot: Used for updating system software and archiving video.
10. RESET: Recover to factory default. (Refer to section 1.4 The Reset Button.)