Eneo GXC-1720M User Manual
Page 13
13
The PCB board:
1
2
3
4
5
6
7 8
9 10
1. Plug
Inlet:
An AC 24V inlet that connects to an external power supply.
2.
ETHERNET 10/100 Connector:
This is a standard RJ-45 connector for 10/100 Mbps
Ethernet networks. PoE (Power over Ethernet) function:
Provides power to the device via the
same cable as used for the network connection.
3. Plug
Inlet:
A DC 12V inlet that connects to an external power supply.
4. GPIO:
This is a 6-PIN connector including the Digital output/input, DC output and
GROUND
items for connecting with external devices.
5.
VIDEO OUT Connector:
The connector provides the unit’s composite video signals to a
monitor. (This connector adjusts and improves the images.)
6. AUDIO
IN:
The connector is used to connect the audio output from other devices to the
camera.
7. USB
port:
The user can use a USB device cable to connect the IP camera to the USB port on
the PC.
8. AUDIO
OUT:
Provides the camera’s audio signal to a speaker or stereo.
9.
SD/ SDHC CARD slot:
This is used for updating system software and archiving / accessing
critical images.
10. RESET:
Recover to factory default. (Refer to section 2.4 The Reset Button.)