Eneo GXC-1720M - Manual (Page 63)

63
Change the System Setting — ICR.
Please follow the steps below to change the IR cut function through the network as necessary.
1. Click on the ICR button on the left side of the “System” page to enter the “ICR” page.
2. For the “IR-Cut Removable filter trigger condition”, mark your options from “Automatic”, “Day Mode”,
“Night Mode” or “Schedule”. Click your choices to enable.
3. Mark the IR light power from “Off”, “On”, “Sync, with ICR” or “Schedule”. Click your choices to
enable (for the IP indoor/ outdoor mini-dome & the bullet only).
4. Click on the Submit button to submit the new user’s setting.
Description of function keys:
Automatic
The Day/Night mode is set automatically. It is normally set in the Day
mode and changes to the Night mode in a dark place.
Day mode
The Day mode disables the IR Cut Filter.
Night mode The Night mode enables the IR Cut Filter.
Schedule mode
Set the Day/Night mode using the schedule. Fill in the time so the
Day/Night mode is normally set to Day mode and it enters the Day mode
at the start time and returns to the Night mode at the end time.