Eneo GXC-1720M - Manual (Page 43)

43
Denoise Denoise (noise reduction) is the process of removing noise from signals.
Mirror:
The mirror stores the images reflected by it so it can be used for
surveillance or to simply take your own picture.
Flip:
To flip the camera’s lens 180 degrees.
White Balance
White balance is the process of removing unnatural shades of color, so that
objects which appear white in reality are rendered white in the images.
Select your options from “Auto”, “Outdoor”, “Indoor”, “Fluorescent” and
“Push Hold”.
Brightness:
An adjustable setting to compensate for backlit scenes.
Contrast:
The measurement for color intensity/strength.
Saturation:
This setting controls the strength of colors from black and white to bold
colors.
Sharpness
An adjustable setting to set the clarity of detail in the images.
WDR Level
The Wide Dynamic Range (WDR) function of a camera is intended to
provide clear images even under back light circumstances. WDR enables
the capture and display of both bright areas and dark areas in the same
frame, in a way that there are details in both areas, i.e. bright areas are not
saturated, and dark areas are not too dark. Select your options of the level
between 1 and 10. 1 is the lowest level and 10 is the highest one. Or select
None to inactivate this function.
Timestamp Label:
Enter the timestamp label.
Timestamp Location: Click to open the list of four location modes to choose from: “UPPER
LEFT”, “UPPER RIGHT”, “BOTTOM LEFT”, and “BOTTOM RIGHT”.
Submit:
Click to set.
NOTE: The default setting table of the exposure mode--
NTSC
Exposure Mode
Shutter Max Gain
Indoor 1/30~1/120 36 dB
Outdoor 1/30~1/750 36 dB
Night 1/30~1/500 12 dB
Moving 1/120~1/1,000 36 dB
Low noise 1/8~1/30 36 dB
PAL
Exposure Mode
Shutter Max Gain
Indoor 1/25~1/100 36 dB
Outdoor 1/25~1/750 36 dB
Night 1/25~1/500 12 dB
Moving 1/100~1/1,000 36 dB
Low noise 1/7.5~1/25 36 dB