Eneo GXC-1720M - Manual (Page 18)

18
2.6 The USB function
The IP camera can provide two separate functions by connecting the IP camera with a PC via the
USB connector.
1. Using an SD card as a card reader.
Insert an SD card into the IP camera and then connect to the PC. You may then transfer files
between the SD card and the PC. Once you've connected your IP camera to your computer
Windows will detect the connection and ask you what you want to do with the SD card.
2. Using an SD card as a configuration tool.
Before using the USB configuration setting page, please remember to remove the SD card or
your PC will read the SD card and won’t show this window.
DHCP ON
DHCP OFF
(default)
NOTE: After changing the settings, please click the “Apply” button. All of the options will
be effective after removing the USB connector.
NOTE: After the IP address has been changed and/ or reset, please unplug the network
cable, then plug it once again to make sure the network connection is in normal
mode.
Network
Setting