Eneo GXC-1720M - Manual (Page 38)

38
5.1.3 Setup
Click on the Setup button on the home page to proceed to the advanced settings.
5.1.3.1 Wizard
To quickly configure your IP Camera, click Wizard on the top of the Setup pages.
This wizard will guide you through a step-by-step process to configure your new camera and
connect the camera to the Internet.
Click Next to continue.
Step 1:
The IP Camera default setting is DHCP On. Use the DHCP protocol if the DHCP server is working
in the LAN. The IP Camera will obtain an IP address automatically from the DHCP server. Or you
can turn the DHCP Off to build the IP Camera working environment with a static IP address. The
default static IP is 192.168.1.10. You can set an IP address for the IP Camera if the LAN unit isn’t
connected to a DHCP server.