Eneo GXC-1720M - Manual (Page 66)

66
Change the System Setting — Users.
You may modify the name and administrator’s password of your camera, as well as add and manage the
user accounts for accessing the camera. You may also use this section to create the unique name and
configure the OSD setting for your camera. Please follow the steps below to change/add the users’
authority through the network as necessary.
1.
Click on the Users button on the left side of the “System” page to enter the “Users” page.
2. Add, modify or delete any user’s data if necessary.
3. Click the Add/ Modify User button to submit the new user’s settings.
4. Click the Home button to return to the home page.
Description of function keys:
User List: The list shows the registered user(s) and the corresponding authority.
Delete:
Deletes a selected user.
Name: Enter the user’s name, which will be added or modified.
Password:
Enter the new password of the user’s name above.
Confirm: Type in the password again for verification.
Authority: Choose an authority option of the user’s name from: Admin, Operator, and
Viewer.
Add/ Modify User:
Click to submit the new setting to the IP camera.