H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 107)

97
Figure 90 Setup tab
2. Configure SNMP settings on the upper part of the page, as described in Table 34 .
3. Click Apply.
Table 34 Configuration items
Item Description
SNMP Specify to enable or disable SNMP agent.
Local Engine ID
Configure the local engine ID.
The validity of a user after it is created depends on the engine ID of the SNMP
agent. If the engine ID when the user is created is not identical to the current
engine ID, the user is invalid.
Maximum Packet Size
Configure the maximum size of an SNMP packet that the agent can receive or
send.
Contact
Set a character string to describe contact information for system maintenance.
If the device is faulty, the maintainer can contact the manufacture factory
according to the contact information of the device.
Location Set a character string to describe the physical location of the device.
SNMP Version Set the SNMP version run by the system.