H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 53)

43
The restored configuration takes effect at the next boot of the device.
To restore the configuration:
1. From the navigation tree, select Device > Configuration.
2. Click the Restore tab.
The configuration restore page appears.
Figure 40 Restoring the configuration
3. Click the upper Browse button.
The file upload dialog box appears.
4. Select the .cfg file to be uploaded, and click OK.
5. Click the lower Browse button.
The file upload dialog box appears.
6. Select the .xml file to be uploaded, and click OK.
Saving the configuration
The save configuration module allows administrators to save the running configuration to the
configuration file (.cfg file or .xml file) to be used at the next startup.
To save the configuration, follow these guidelines:
• Saving the configuration takes some time.
• Only one administrator can save the configuration at a moment. If one administrator saves the
configuration while the system is saving the configuration as required by another administrator, the
system prompts the second administrator to try later.
This module supports saving the configuration in either of the following two modes: fast or common.
To save the configuration in fast mode, click the Save button at the upper right of the auxiliary area.