H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 147)

137
Figure 137 Modifying a VLAN interface
3. Modify a VLAN interface as described in Table 45 .
4. Click Apply.
Table 45 Configuration items
Item Description
Select VLAN Interface
Select the VLAN interface to be configured.
The VLAN interfaces available for selection in the list are those created on the page
for creating VLAN interfaces.
Modify IPv4 Address
DHCP Configure the way in which the VLAN interface gets an
IPv4 address.
Allow the VLAN interface to get an IP address
automatically by selecting the DHCP or BOOTP option, or
manually assign the VLAN interface an IP address by
selecting the Manual option. In the latter case, you must
set the mask length or enter a mask in dotted decimal
notation format.
The device does not suport to get an IP address through
DHCP or BOOTP.
BOOTP
Manual