H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 132)

122
Recommended VLAN configuration procedures
Recommended configuration procedure for assigning an
access port to a VLAN
Step Remarks
1. Creating VLANs .
Required.
Create one or multiple VLANs.
2. Configuring the link type of a port .
Optional.
Configure the link type of the port as access.
By default, the link type of a port is access.
3. Setting the PVID for a port .
Configure the PVID of
the access port.
Required.
An access port has only
one untagged VLAN and
the untagged VLAN is its
PVID. The three operations
produce the same result,
and the latest operation
takes effect.
By default, an access port
is an untagged member of
VLAN 1.
4. Configuring the access ports as untagged
members of a VLAN:
a. Selecting a VLAN
Specify the range of VLANs available for
selection during related operations. Configure
a subset of all existing VLANs. This step is
required before you perform operations on the
Detail, Modify VLAN, and Modify Port tabs.
b. Modifying a VLAN
Configure the access ports as untagged
members of the specified VLAN.
N/A
5. Modifying a port .
Configure the
untagged VLAN of the
port.
Recommended configuration procedure for assigning a trunk
port to a VLAN
Step Remarks
1. Creating VLANs .
Required.
Create one or multiple VLANs.
2. Configuring the link type of a port .
Optional.
Configure the link type of the port as trunk.
To configure a hybrid port as a trunk port, first
configure it as an access port.
By default, the link type of a port is access.