H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 69)

59
Step Remarks
2. Configure mirroring ports
for the mirroring group.
Required.
For more information, see "
Configuring ports for a mirroring group ."
Select the port type Mirror Port.
3. Configure the monitor port
for the mirroring group.
Required.
For more information, see "
Configuring ports for a mirroring group ."
Select the port type Monitor Port.
Configuring a mirroring group
1. From the navigation tree, select Device > Port Mirroring.
2. Click the Add tab.
The page for adding a mirroring group appears.
Figure 52 Adding a mirroring group
3. Configure the mirroring group, as described in Table 15 .
4. Click Apply.
Table 15 Configuration items
Item Description
Mirroring Group ID
ID of the mirroring group to be added.
The range for the mirroring group ID varies with devices.
Type
Specify the type of the mirroring group to be added:
Local means adding a local mirroring group.