H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 50)

40
Figure 37 Setting the log host
3. Configure the log host, as described in Table 12 .
4. Click Apply.
Table 12 Configuration items
Item Description
IPv4/Domain Set the IPv4 address or domain name of
the log host, and select the VPN instance
name of the VPN to which the flow
logging server belongs.. IMPORTANT:
• You can specify up to four log hosts.
• The device does not support VPN
instances.
Loghost IP/Domain
VPN instance
IPv6 Set the IPv6 address of the log host.
The device does not support IPv6
addresses.
Loghost IP
Setting buffer capacity and refresh interval
1. From the navigation tree, select Device > Syslog.
2. Click the Log Setup tab.
The syslog configuration page appears.