Configuring the link type of a port – H3C Technologies H3C WX5500E Series Access Controllers User Manual
Page 135
125
Figure 124 Creating VLANs
Table 41 Configuration items
Item Description
VLAN IDs
IDs of the VLANs to be created.
Modify the description of the
selected VLAN
•
ID—Select the ID of the VLAN whose description string is to be modified.
Click the ID of the VLAN to be modified in the list in the middle of the page.
•
Description—Set the description string of the selected VLAN.
By default, the description string of a VLAN is its VLAN ID, such as VLAN
0001.
Configuring the link type of a port
You can also configure the link type of a port on the Setup tab of Device > Port Management. For more
information, see "Managing ports."
To configure the link type of a port:
1.
Select Network > VLAN from the navigation tree.
2.
Click the Modify Port tab.
3.
Select the port that you want to configure on the chassis front panel.
4.
Select the Link Type option.
5.
Set the link type, which can be access, hybrid, or trunk.
6.
Click Apply.
A progress dialog box appears.