H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 119)

109
Figure 107 Configuring an SNMP read and write community
b. In the Community Name field, enter private.
c. From the Access Right list, select Read and write.
d. Click Apply.
4. Enable SNMP traps:
a. Click the Trap tab.
The Trap tab page appears.
Figure 108 Enabling SNMP traps
b. Select the box of Enable SNMP Trap.
c. Click Apply.
5. Configure a target host SNMP traps:
a. Click Add on the Trap tab page.
The page for adding a target host of SNMP traps appears.