Method 1: create static link aggregation group 1 – H3C Technologies H3C WX5500E Series Access Controllers User Manual

Page 210

Advertising
background image

200

Figure 182 Network diagram

You can create a static or dynamic link aggregation group to achieve load balancing.

Method 1: Create static link aggregation group 1

1.

Select Network > Link Aggregation from the navigation tree.

2.

Click Create.

3.

Configure static link aggregation group 1:

a.

Enter link aggregation interface ID 1.

b.

Select the Static (LACP Disabled) option for the aggregate interface type.

c.

Select GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3 on the
chassis front panel.

4.

Click Apply.

Advertising
See also other documents in the category H3C Technologies Routers: