Configuring voice vlan globally – H3C Technologies H3C WX5500E Series Access Controllers User Manual
Page 154
144
Recommended configuration procedure for a port in automatic voice VLAN assignment mode
Step Remarks
Optional.
Configure the voice VLAN to operate in security mode, and configure
the aging timer.
Required.
Configure the voice VLAN assignment mode of a port as automatic,
and enable the voice VLAN function on the port.
By default, the voice VLAN assignment mode of a port is automatic,
and the voice VLAN function is disabled on a port.
3. Adding OUI addresses to the
Optional.
The system supports up to 16 OUI addresses.
By default, the system is configured with seven OUI addresses, as
shown in
Recommended configuration procedure for a port in manual voice VLAN assignment mode
Step Remarks
Optional.
Configure the voice VLAN to operate in security mode, and configure the
aging timer.
2.
Assigning the port to the
voice VLAN.
Required.
After an access port is assigned to the voice VLAN, the voice VLAN
automatically becomes the default VLAN of the access port.
For more information, see "
3.
Configuring the voice
VLAN as the default
VLAN of a hybrid or
trunk port.
Optional.
This task is required if the incoming voice traffic is untagged and the link type
of the receiving port is trunk or hybrid. If the incoming voice traffic is tagged,
do not perform this task.
For more information, see "Managing ports."
Required.
Configure the voice VLAN assignment mode of a port as manual, and enable
voice VLAN on the port.
By default, the voice VLAN assignment mode of a port is automatic, and voice
VLAN is disabled on a port.
.
Optional.
You can configure up to 16 OUI addresses.
By default, the system is configured with the seven OUI addresses shown
Configuring voice VLAN globally
1.
Select Network > Voice VLAN from the navigation tree.