H3C Technologies H3C WX5500E Series Access Controllers User Manual

Page 241

Advertising
background image

231

Figure 208 Configuring ports

3.

Configure the voice VLAN function on the two ports:

a.

Select Network > Voice VLAN from the navigation tree.

b.

Click the Port Setup tab to enter the page for configuring the voice VLAN function on ports.

c.

Select Auto from the Voice VLAN port mode list, select Enable from the Voice VLAN port state
list, enter the voice VLAN ID 2, and select port GigabitEthernet 1/0/1 and GigabitEthernet

1/0/2 from the chassis front panel.

d.

Click Apply.

Advertising
See also other documents in the category H3C Technologies Routers: