H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 90)

80
Task Remarks
Displaying RMON event logs
If you configure the system to log an event after the event is triggered
when you configure the event group, the event is recorded in the RMON
log. Perform this task to display the details of the log table.
Configuring a statistics entry
1. From the navigation tree, select Device > RMON.
The Statistics tab page appears.
Figure 69 Statistics entry
2. Click Add.
The page for adding a statistics entry appears.
Figure 70 Adding a statistics entry
3. Configure a statistic entry, as described in Table 25 .
4. Click Apply.
Table 25 Configuration items
Item Description
Interface Name
Select the name of the interface on which the statistics entry is created.
Only one statistics entry can be created on one interface.
Owner Set the owner of the statistics entry.