H3C Technologies H3C Intelligent Management Center - Manual (Page 170)

160
3. To view the details for an individual task, click the contents in the Task Name field of the Traffic
Analysis Task List whose Task Type is Probe.
Traffic analysis task details
• Task Name—Contains the name of the task.
• Task Description—Contains the description for the associated task.
• Server—Contains the name or IP address of the NTA server.
• Task Type—Identifies the task type. Options are:
{
Interface
{
VLAN
{
Probe
{
Application
{
Host
{
VPN
{
Inter-business
• Reader—Identifies the operator groups in IMC that have been granted access to view the
reports generated by the associated traffic analysis task.
• Baseline Analysis—Indicates whether the Baseline Analysis feature is enabled for the task. If
the Baseline Analysis field is not displayed, the Baseline Analysis feature is disabled in the
NTA parameters. For more information on configuration options for the NTA parameters,
including the Baseline Analysis feature, see " Configuring NTA traffic analysis parameters ."
• Probe Information—Lists the name, IP address, and description for the probe providing traffic
for this traffic analysis task.
4. Click Back to return to the Traffic Analysis Task List.
Adding a probe traffic analysis task
1. Select Service > Traffic Analysis and Audit > Settings.
2. Click the Traffic Analysis Task Management link in the Settings area of the Traffic Analysis and
Audit page.
NTA displays all tasks in the Traffic Analysis Task List in the main pane of the Task Management
page.
3. Click Add.
The Add Traffic Analysis Task page is displayed.
4. To add a probe traffic analysis task, click the option next to Probe in the Select Task Type area.
5. Click Next.
The Add Traffic Analysis Task page is refreshed.
6. Enter a name for this task in the Task Name field. The task name must be unique.
NOTE:
The name you assign to a task is the link to the task reports. Therefore, assign descriptive and meaningful
names to a task that help you navigate to reports quickly and easily.
7. Enter a description for this task in the Task Description field.