H3C Technologies H3C Intelligent Management Center - Manual (Page 251)

241
selected application. The Application Traffic Trend stacked area chart provides average inbound or
outbound traffic rates for all applications observed for all hosts in the selected traffic analysis task.
Protocol reports for a host traffic analysis task include the Protocol List, which provides a list of protocols
observed for all hosts in the selected host traffic analysis task. This list includes total volume of traffic for
the associated protocol, rate of traffic, and the percentage of all observed traffic observed on all hosts
generated by the associated protocol. This report also enables you to provide detailed reports for the
selected protocol. The Protocol Traffic Trend stacked area chart provides average inbound or outbound
traffic rates for all protocols observed for all hosts in the selected traffic analysis task.
Application category reports for a host traffic analysis task include the Application Category List, which
provides a list of the application categories observed for all hosts in the selected host traffic analysis task.
This list includes total volume of traffic for the associated application categories, rate of traffic, and the
percentage of all observed traffic observed on all hosts generated by the associated application
category. This report also enables you to provide detailed reports for the selected application category.
The Application Category Traffic Trend stacked area chart provides average inbound or outbound traffic
rates for all applications observed for all hosts in the selected traffic analysis task.
As with all of the report types for a host task, NTA also provides you with a query option for filtering
reports based on criteria you define. To view the reports for a host traffic analysis task, click the
Application tab to view application reports for the selected host traffic analysis task, and set Query Type
to Application as described in " Query applications ."
Application reports display reports organized by the list of applications in NTA. NTA provides many
system defined applications and NTA also supports user defined applications. For more information on
applications in NTA, see " Managing applications ." The following information describes the reports
available for applications.
Query applications
NTA enables you to change the filter criteria for application reports. You can change the default settings
for query type, application, or time range for the graphs and tables to customize the reports displayed
under the Application tab.
1. Click the query criteria icon in the upper right corner of the application report, and select
Custom from the list that appears. Or, click the Advanced icon to the right of the Query
Criteria to expand the query criteria setting area.
2. Select Application from the Query Type list.
The page will display the report for Layer 4 through Layer 7 applications.
3. Enter or select the other query criteria:
• Application—To the right of the Application field, click the Select button to select the
application for which you want to search.
The Query Applications dialog box appears and an empty Application List appears in the
lower portion of the dialog box.
To select the application for which you want to search, you must first query the Application List
as follows:
a. In the Query Applications area of the dialog box, enter or select one or more of the following
search criteria:
• Application—Enter a partial or complete name for the applications you want to search for
in the Application field.